Decking Fastener Estimator
Estimate how many boards, screws or hidden clips a deck needs from its area, the board format and the joist spacing.
Assumptions you can change
- Boards run across the joists and end on a joist.
- Joists crossed per board = board length ÷ joist spacing, rounded down, plus one.
- Default of two screws per board at each joist, in line with the guidance on our Hardware page. Lower the intermediate count if your installer uses one.
- Hidden clips: one per board at each joist; each clip is shared by two boards.
This is a planning aid, not an engineering calculation. It does not size joists or check loads.
Screws and clips are alternatives: choose one fixing method. Quantities are estimates; we confirm them on your drawings.
Request current stock
Tell us the species, dimensions and quantity. We reply with what is available now.
Send your drawings
Architects, designers and contractors: share plans and quantities and we will come back with a tailored proposal.
Visit by appointment
We are open Monday to Friday 8:30–16:30 and Saturday 8:30–12:00 (closed Sundays). Visits to the lumberyard and showroom are by appointment only.
